Our products

Clamping devices

The clamping device is used to tighten parts firmly, e.g. when gluing, welding

Joiner’s clamp (steel strip)

Joiner’s clamp, different sizesUse of Joiner’s clamp with clamping attachment

  • The clamp can be used at an area of 120 cm2. The average tightening pressure is of 0,3 MPa (about 3 kp/cm2)
  • Clamping length 150 – 3000mm
  • The immovable and sliding arms are made of the E335 material according to the EN 10025-2 Standard
  • The arm surface is coated by a protective paint. The TR 18 x 4 thread is protected by a preservative coat. The wooden handle is coated by a varnish lacquer
  • Wide range of spare parts and accessories

Steel casting clamp

Steel casting clamp size 150mm

  • The clamp can be used at an area of 120 cm2. The average tightening pressure is of 0,3 MPa (about 3 kp/cm2)
  • Clamping length 150 – 250mm
  • The immovable and sliding arms are made of the C45 material according to the EN 10025-2 Standard. The steel parts are galvanised. The wooden handle is coated by a varnish lacquer
  • Surface treatment – galvanic zinc

Welder grounding clamp

Welder grounding clamp with lever Welder grounding clamp with connected ground cable

Use for attaching the welding machine ground cable. Current load 350A.

  • The clamp can be used at an area of 120 cm2. The average tightening pressure is of 0,3 MPa (about 3 kp/cm2)
  • Clamping length 150mm
  • The immovable and sliding arms are made of the C45 material according to the EN 10025-2 Standard. The steel parts are galvanised.
  • Surface treatment – galvanic zinc
  • It is equipped with a loop for attachment of the grounding cable
  • The optional design includes a wooden handle or lever

Case openers

Type L, S

Case openers - detailed view

The case opener is a steel lever of the L or S shape. It is instrumental to opening of cases and extracting of nails up 3,5 mm in diameter with a head of up to 9 mm in diameter.
The opener is forged of a single steel bar of 16 mm in diameter, made of the C45E material according to the EN 10083-1 Standard.

  • The L type – the nail-extracting notch lies within the chisel axis. The straight cylindrical end is equipped with a plastic handle.
  • The S type – one end of this opener forms a chisel, the other end includes the nail-extracting notch.
  • The openers are finished in a red coat.